toxcore/INSTALL.md
2015-10-23 22:54:22 +02:00

19 KiB

#Install Instructions

##Installation ###Most Unix like OSes:

Quick install:

On Gentoo:

# layman -f && layman -a tox-overlay && emerge net-libs/tox

And you're done :)
If you happen to run some other distro which isn't made for compiling, there are steps below:

Build manually

Build dependencies:

Note: package fetching commands may vary by OS.

On Ubuntu < 15.04 / Debian < 8:

sudo apt-get install build-essential libtool autotools-dev automake checkinstall check git yasm

On Ubuntu >= 15.04 / Debian >= 8:

sudo apt-get install build-essential libtool autotools-dev automake checkinstall check git yasm libsodium13 libsodium-dev

On Fedora:

dnf groupinstall "Development Tools"
dnf install libtool autoconf automake check check-devel

Using dnf install @"Development Tools" is also valid and slightly shorter / cleaner way. @"Rpm Development Tools" would carry the remaining dependencies listed here.

On SunOS:

pkg install autoconf automake gcc-47

On FreeBSD 10+:

pkg install net-im/tox

Note, if you install from ports select NaCl for performance, and sodium if you want it to be portable.

For A/V support, also install the dependences listed in the libtoxav section. Note that you have to install those dependencies before compiling toxcore.

You should get and install libsodium. If you have installed libsodium from repo, ommit this step, and jump directly to compiling toxcore:

git clone git://github.com/jedisct1/libsodium.git
cd libsodium
git checkout tags/1.0.3
./autogen.sh
./configure && make check
sudo checkinstall --install --pkgname libsodium --pkgversion 1.0.0 --nodoc
sudo ldconfig
cd ..

Or if checkinstall is not easily available for your distribution (e.g., Fedora), this will install the libs to /usr/local/lib and the headers to /usr/local/include:

git clone git://github.com/jedisct1/libsodium.git
cd libsodium
git checkout tags/1.0.3
./autogen.sh
./configure
make check
sudo make install
cd ..

If your default prefix is /usr/local and you happen to get an error that says "error while loading shared libraries: libtoxcore.so.0: cannot open shared object file: No such file or directory", then you can try running sudo ldconfig. If that doesn't fix it, run:

echo '/usr/local/lib/' | sudo tee -a /etc/ld.so.conf.d/locallib.conf
sudo ldconfig

You may run into a situation where there is no /etc/ld.so.conf.d directory. You could either create it manually, or append path to local library to ld.so.conf:

echo '/usr/local/lib/' | sudo tee -a /etc/ld.so.conf 
sudo ldconfig
Compile toxcore

Then clone this repo, generate makefile, and install toxcore system-wide:

git clone git://github.com/irungentoo/toxcore.git
cd toxcore
autoreconf -i
./configure
make
sudo make install
###OS X:

You need the latest XCode with the Developer Tools (Preferences -> Downloads -> Command Line Tools). The following libraries are required along with libsodium and cmake for Mountain Lion and XCode 4.6.3 install libtool, automake and autoconf. You can download them with Homebrew, or install them manually.

Note: OS X users can also install Toxcore using osx_build_script_toxcore.sh

There are no binaries/executables going to /bin/ or /usr/bin/ now. Everything is compiled and ran from the inside your local branch. See Usage below. ####Homebrew: To install from the formula:

brew tap Tox/tox
brew install --HEAD libtoxcore

To do it manually:

brew install libtool automake autoconf libsodium check

Then clone this repo and generate makefile:

git clone git://github.com/irungentoo/toxcore.git
cd toxcore
autoreconf -i
./configure
make
make install

If execution fails with errors like "dyld: Library not loaded: /opt/tox-im/lib/libtoxcore.0.dylib", you may need to specify libsodium path:

Determine paths:

brew list libsodium

Configure include and lib folder and build again:

./configure --with-libsodium-headers=/usr/local/Cellar/libsodium/1.0.0/include/ --with-libsodium-libs=/usr/local/Cellar/libsodium/1.0.0/lib/
make
make install
####Non-homebrew:

Grab the following packages:

  • https://gnu.org/software/libtool/
  • https://gnu.org/software/autoconf/
  • https://gnu.org/software/automake/
  • https://github.com/jedisct1/libsodium
  • http://check.sourceforge.net/
  • http://yasm.tortall.net/Download.html (install before libvpx)
  • https://code.google.com/p/webm/downloads/list
  • http://www.opus-codec.org/downloads/
  • http://www.freedesktop.org/wiki/Software/pkg-config/

Macports: (https://www.macports.org/) All toxcore dependencies can be installed from MacPorts. This is often easier on PowerPC Macs, and any version of OS X prior to 10.6, since Homebrew is supported on 10.6 and up, but not much (or at all) on older systems. A few packages have slightly different names from the corresponding package in Debian.

Same: libtool autoconf automake libsodium check yasm Different: libvpx (webm) libopus pkgconfig gettext

(the libintl, from gettext, built into OS X 10.5 is missing libintl_setlocale, but the Macports build has it)

Verify where libintl is on your system: (MacPorts puts it in /opt/local)

for d in /usr/local/lib /opt/local/lib /usr/lib /lib; do ls -l $d/libintl.*; done

Check if that copy has libintl_setlocale:

nm /opt/local/lib/libintl.8.dylib | grep _libintl_setlocale

Certain other tools may not be installed, or outdated, and should also be installed from MacPorts for simplicity: git cmake

If libsodium was installed with MacPorts, you may want to symlink the copy in /opt/local/lib to /usr/local/lib. That way you don't need special configure switches for toxcore to find libsodium, and every time MacPorts updates libsodium, the new version will be linked to toxcore every time you build:

ln -s /opt/local/lib/libsodium.dylib /usr/local/lib/libsodium.dylib

Much of the build can then be done as for other platforms: git clone, and so on. Differences will be noted with (OS X 10.5 specific)

pkg-config is important for enabling a/v support in tox core, failure to install pkg-config will prevent tox core form finding the required libopus/libvpx libraries. (pkg-config may not configure properly, if you get an error about GLIB, run configure with the following parameter, --with-internal-glib).

Uncompress and install them all. Make sure to follow the README as the instructions change, but they all follow the same pattern below:

./configure
make
sudo make install

Compiling and installing Tox Core

cd toxcore
autoreconf -i
./configure (OS X 10.5 specific)
./configure CC="gcc -arch ppc -arch i386" CXX="g++ -arch ppc -arch i386" CPP="gcc -E" CXXCPP="g++ -E"
make
make install (OS X 10.5 specific)
should be: sudo make install
If it worked, you should have all the toxcore dylibs in /usr/local/lib: (besides the four below, the rest are symlinks to these)
$ ls -la /usr/local/lib/libtox*.dylib
libtoxav.0.dylib
libtoxcore.0.dylib
libtoxdns.0.dylib
libtoxencryptsave.0.dylib
to check what CPU architecture they're compiled for:
$ lipo -i /usr/local/lib/libtoxencryptsave.0.dylib
You should now be able to move on to compiling Toxic/Venom or some other client application
There is also a shell script called "osx_build_script_toxcore.txt" which automates everything from "git pull" to "sudo make install", once the dependencies are already taken care of by MacPorts.

If after running ./configure you get an error about core being unable to find libsodium (and you have installed it) run the following in place of ./configure;

./configure --with-libsodium-headers=/usr/local/include/ --with-libsodium-libs=/usr/local/lib

Ensure you set the locations correctly depending on where you installed libsodium on your computer.

If there is a problem with opus (for A/V) and you don't get a libtoxav, then try to set the pkg-config environment variable beforehand:

export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
###Windows:

####Cross-compile

It's a bit challenging to build Tox and all of its dependencies nativly on Windows, so we will show an easier, less error and headache prone method of building it -- cross-compiling.

#####Setting up a VM

We will assume that you don't have any VM running Linux around and will guide you from the ground up.

First, you would need to get a virtual machine and a Linux distribution image file.

For a virtual machine we will use VirtualBox. You can get it here.

For a Linux distribution we will use Lubuntu 14.04 32-bit, which you can get here.

After you have those downloaded, install the VirtualBox and create a VM in it. The default of 512mb of RAM and 8gb of dynamically-allocated virtual hard drive would be enough.

When you have created the VM, go into its Settings -> System -> Processor and add some cores, if you have any additional available, for faster builds.

Then, go to Settings -> Storage, click on Empty under Controller: IDE, click on the little disc icon on the right side of the window, click on Choose a virtual CD/DVD disk file and select the downloaded Lubuntu image file.

Start the VM and follow the installation instructions.

After Lubuntu is installed and you have booted into it, in VirtualBox menu on top of the window select Devices -> Insert Guest Additions CD image....

Open terminal from Lubuntu's menu -> Accessories.

Execute:

sudo apt-get update
sudo apt-get install build-essential -y
cd /media/*/*/
sudo ./VBoxLinuxAdditions.run

After that, create a folder called toxbuild somewhere on your Windows system. The go to Devices -> Shared Folders Settings... in the VirtualBox menu, add the toxbuild folder there and set Auto-mount and Make Permanent options.

Execute:

sudo adduser `whoami` vboxsf

Note the use of a grave accent instead of an apostrophe.

Then just reboot the system with:

sudo reboot

After the system is booted, go to Devices -> Shared Clipboard and select Bidirectional. Now you will be able to copy-paste text between the host and the guest systems.

Now that the virtual machine is all set up, let's move to getting build dependencies and setting up environment variables.

#####Setting up the environment

First we will install all tools that we would need for building:

sudo apt-get install build-essential libtool autotools-dev automake checkinstall check git yasm pkg-config mingw-w64 -y

Then we will define a few variables, depending on which you will build either 32-bit or 64-bit Tox.

For 32-bit Tox build, do:

WINDOWS_TOOLCHAIN=i686-w64-mingw32
LIB_VPX_TARGET=x86-win32-gcc

For 64-bit Tox build, do:

WINDOWS_TOOLCHAIN=x86_64-w64-mingw32
LIB_VPX_TARGET=x86_64-win64-gcc

This is the only difference between 32-bit and 64-bit build procedures.

For speeding up the build process do:

MAKEFLAGS=j$(nproc)
export MAKEFLAGS

And let's make a folder where we will be building everything at

cd ~
mkdir prefix
cd prefix
PREFIX_DIR=$(pwd)
cd ..
mkdir build
cd build
#####Compiling

Now we will build libraries needed for audio/video: VPX and Opus.

VPX:

git clone https://chromium.googlesource.com/webm/libvpx
cd libvpx
git checkout tags/v1.3.0
CROSS="$WINDOWS_TOOLCHAIN"- ./configure --target="$LIB_VPX_TARGET" --prefix="$PREFIX_DIR" --disable-examples --disable-unit-tests --disable-shared --enable-static
make
make install
cd ..

Opus:

wget http://downloads.xiph.org/releases/opus/opus-1.1.tar.gz
tar -xf opus-1.1.tar.gz
cd opus-1.1
./configure --host="$WINDOWS_TOOLCHAIN" --prefix="$PREFIX_DIR" --disable-extra-programs --disable-doc --disable-shared --enable-static
make
make install
cd ..

Now we will build sodium crypto library:

git clone https://github.com/jedisct1/libsodium/
cd libsodium
git checkout tags/1.0.3
./autogen.sh
./configure --host="$WINDOWS_TOOLCHAIN" --prefix="$PREFIX_DIR" --disable-shared --enable-static
make
make install
cd ..

And finally we will build Tox:

git clone https://github.com/irungentoo/toxcore
cd toxcore
./autogen.sh
./configure --host="$WINDOWS_TOOLCHAIN" --prefix="$PREFIX_DIR" --disable-ntox --disable-tests --disable-testing --with-dependency-search="$PREFIX_DIR" --disable-shared --enable-static
make
make install
cd ..

Then we make Tox shared library:

cd "$PREFIX_DIR"
mkdir tmp
cd tmp
$WINDOWS_TOOLCHAIN-ar x ../lib/libtoxcore.a
$WINDOWS_TOOLCHAIN-ar x ../lib/libtoxav.a
$WINDOWS_TOOLCHAIN-ar x ../lib/libtoxdns.a
$WINDOWS_TOOLCHAIN-ar x ../lib/libtoxencryptsave.a
$WINDOWS_TOOLCHAIN-gcc -Wl,--export-all-symbols -Wl,--out-implib=libtox.dll.a -shared -o libtox.dll *.o ../lib/*.a /usr/$WINDOWS_TOOLCHAIN/lib/libwinpthread.a -liphlpapi -lws2_32 -static-libgcc

And we will copy it over to the toxbuild directory:

mkdir -p /media/sf_toxbuild/release/lib
cp libtox.dll.a /media/sf_toxbuild/release/lib
mkdir -p /media/sf_toxbuild/release/bin
cp libtox.dll /media/sf_toxbuild/release/bin
mkdir -p /media/sf_toxbuild/release/include
cp -r ../include/tox /media/sf_toxbuild/release/include

That's it. Now you should have release/bin/libtox.dll, release/bin/libtox.dll.a and release/include/tox/<headers> in your toxbuild directory on the Windows system.

####Native

Note that the Native instructions are incomplete, in a sense that they miss instructions needed for adding audio/video support to Tox. You also might stumble upon some unknown MinGW+msys issues while trying to build it.

You should install:

When installing MinGW, make sure to select the MSYS option in the installer. MinGW will install an "MinGW shell" (you should get a shortcut for it), make sure to perform all operations (i.e., generating/running configure script, compiling, etc.) from the MinGW shell.

First download the source tarball from https://download.libsodium.org/libsodium/releases/ and build it. Assuming that you got the libsodium-1.0.0.tar.gz release:

tar -zxvf libsodium-1.0.0.tar.gz
cd libsodium-1.0.0
./configure
make
make install
cd ..

You can also use a precompiled win32 binary of libsodium, however you will have to place the files in places where they can be found, i.e., dll's go to /bin headers to /include and libraries to /lib directories in your MinGW shell.

Next, install toxcore library, should either clone this repo by using git, or just download a zip of current Master branch and extract it somewhere.

Assuming that you now have the sources in the toxcore directory:

cd toxcore
autoreconf -i
./configure
make
make install
####Clients: While [Toxic](https://github.com/tox/toxic) is no longer in core, a list of Tox clients are located in our [wiki](https://wiki.tox.chat/doku.php?id=clients) ##Additional ###Advanced configure options: ###A/V support: ####libtoxav:

'libtoxav' is needed for A/V support and it's enabled by default. You can disable it by adding --disable-av argument to ./configure script like so:

./configure --disable-av

There are 2 dependencies required for libtoxav: libopus and libvpx. If they are not installed A/V support is dropped.

Install on fedora:

yum install opus-devel libvpx-devel

Install on ubuntu:

sudo apt-get install libopus-dev libvpx-dev pkg-config

If you get the "Unable to locate package libopus-dev" message, add the following ppa and try again:

sudo add-apt-repository ppa:ubuntu-sdk-team/ppa && sudo apt-get update && sudo apt-get dist-upgrade

Install from source (example for most unix-like OS's):

libvpx:

git clone https://chromium.googlesource.com/webm/libvpx
cd libvpx
./configure
make -j3
sudo make install
cd ..

libopus:

wget http://downloads.xiph.org/releases/opus/opus-1.0.3.tar.gz
tar xvzf opus-1.0.3.tar.gz
cd opus-1.0.3
./configure
make -j3
sudo make install
cd ..
###Bootstrap daemon:

Daemon is disabled by default. You can enable it by adding --enable-daemon argument to ./configure script like so:

./configure --enable-daemon

There is one dependency required for bootstrap daemon: libconfig-dev >= 1.4.

Install on fedora:

yum install libconfig-devel

Install on ubuntu:

sudo apt-get install libconfig-dev

OS X homebrew:

brew install libconfig

OS X non-homebrew: Grab the following package, uncompress and install

See this readme on how to set up the bootstrap daemon.

###nTox test cli:

nTox is disabled by default. You can enable it by adding --enable-ntox argument to ./configure script like so:

./configure --enable-ntox

There is one dependency required for nTox: libncurses.

Install on fedora:

yum install ncurses-devel

Install on ubuntu:

sudo apt-get install ncurses-dev