- multiple places: tox_getname() doesn't terminate the string, make sure nTox does
- format_message():
. - renamed to print_formatted_message()
. - changed semantics: does the new_line() itself, saves caller from freeing the buffer (which no caller did)
. - changed signature: now also prints the friend's name when sending
. - intern: date is only printed once, the message line gets only time
- print_message(): enforce null termination
- main():
. - setlocale() to init locale (for date/time printing)
. - own name: ensure null termination
Messenger.c:
- notify of friend name change *before* the old name is overwritten
nTox.c:
- flag[]: additional flag for special wrapping
- help expanded and split (to keep below 256 chars)
- new_lines_mark(): stores flag for special wrapping
- print_friendlist():
. - extracted pattern for output
. - added length of id string allocation
. - replaced '\t' with '+ ', wrappers don't account for '\t'
- line_eval():
. - removed a few do_refresh() directly after a new_lines() (calls do_refresh() at its end)
. - 'h' (help): parsing of an additional character for f(riend) or g(roup)
- wrap():
. - the major bugfix:
. - no more endless looping if the input had a substring with no spaces
. for more than line_width (e.g. ID of 78 and window smaller than 78)
- wrap_bars(): wrap() for "rich" messages, honors embedded '\n', breaks preferable at '|'
- print_help(): listed all options and added explanations
- print_invite(): fixed minuscule typo
- main(): made print_help() reachable again
nTox.h:
- majorly cut down to what is really needed
Additionally (besides cleanups):
network.h/tox.h:
- WIN32: fix a strange sa_family_t definition
- WIN32: define EWOULDBLOCK to WSAEWOULDBLOCK
- WIN32: kill macro for an existing function (IN6_ADDR_EQUAL)
network.c:
- use EWOULDBLOCK instead of EAGAIN (same value, but EWOULDBLOCK is more "popular")
- new_networking(): only try to enable IPv4-in-IPv6 if it's not already enabled per default
- inet_ntop()/inet_pton(): WIN32: remove partial initializers in favor of a simple memset()
- ip_equal(): WIN32: use an existing function
- logging: networking_wait_execute(): only dump result if not timeout
- logging: loglogdata(): kill an unused variable
LAN_discovery.c:
- send_broadcasts(): re-enabled, can only support IPv4 by principle, split into fetch_broadcast_info() (to fetch the addresses once) and send_broadcasts() (actual sending)
DHT.c:
- DHT_load_state_callback(): enclosed a fprintf(stderr, ...) into #ifdef DEBUG
Lossless_UDP.c:
- change_handshake(): harden against strange sa_family_t definitions
Messenger.c:
- logging: fix ID to string conversion
util.c:
- logging: eliminate a signed-warning
Tox sync is a proof of concept bittorrent sync inspired application that
uses tox to sync the contents of two folders.
Currently only works on POSIX compilant operating systems.
Compilerflag: CLIENT_ONETOONE_IP (to define in DHT.h, default unset i.e. NEW case: two addresses)
Every function in DHT{_test}.c working on Client_data has been rewritten to store IPv4 addresses in assoc4, IPv6 addresses in assoc6.
Loading/Storing of states defined with other compiler switch is transparently adjusting to the differences.
DHT.h, DHT.c:
- introduction and handling of the structure changes
DHT_test.c, Messenger.c:
- logging adapted to new structures
util.h:
- LOGGING isn't undefined per default anymore
Please wait until the tox.h API is updated before integrating it into
your clients.
nTox:
/g
creates a new group chat
/i friendnum groupnum
invite friendnum to groupnum
/z groupnum message
send message to groupnum
NOTE: group chats currenly might not handle packet loss well if there are less than 6 participants.
- addr_resolv(_or_parse_ip)(): added an optional parameter to return both an IPv6 and an IPv4 address if requested address family was AF_UNSPEC
- logging of unhandled packets
DHT.c:
- bootstrap_from_address(): use the additional return from addr_resolv_or_parse_ip() to bootstrap in both network types at once
Lossless_UDP_testclient.c:
- main(): adapt to signature change of addr_resolve()
Messenger.c. LAN_discovery.h:
- lost a htons(), readded
- moved LAN_DISCOVERY_INTERVAL #define into LAN_discovery.h
LAN_discovery.c:
- added IPv4-in-IPv6 local address test
- #define'd tox's network port (as range)
- finally killed tox_new_ex() in favor of changing tox_new()'s signature
- renamed tox_bootstrap() to tox_bootstrap_from_ip()
network.h:
- #define'd tox's network port (as range)
- renamed SEND_NODES_EX to SEND_NODES_IPV6
- bind() loop uses #define'd port range
DHT.c:
- renamed SEND_NODES_EX to SEND_NODES_IPV6
- sending ipv6 node addresses even if can't use them ourselves
nTox.c:
- adapted to changed tox_new()
- correct a message who claims we're going to exit when we actually aren't
- don't treat a failed close on reading the data file as failure of the reading
- don't claim "Added friend" per default, check for returned ID first
- on '/q' SAVE... else everything but the keys is lost on each restart
- for that, split load_key() into load_data() and save_data()
- announce own nickname on startup
- tox_bootstrap_ex(), DHT_bootstrap_ex() renamed to tox_bootstrap_from_address(), DHT_bootstrap_from_address()
- (handle_)sendnodes_ex() renamed to (handle_)sendnodes_ipv6()
- only sending sendnodes_ipv6() if we're actually IPv6 enabled
- changed comments to conform better
nTox.c, Messenger_text.c, DHT_test.c, DHT_bootstrap.c:
- fallout from *_ex() to *_from_address()
DHT_bootstrap.c:
- corrected a potentially wrong info message
util.c:
- fixed logfile name: now (funcptr) => now() (number)
network.c:
- addead comment about the necessity of bind() to succeed
auto_test/messenger_test.c:
- defaulting ipv6enabled to TOX_ENABLE_IPV6_DEFAULT
LAN_discovery.c:
- slight cleanup and comments for clarity
- return to the caller if the string could be resolved into an IP
other/DHT_bootstrap.c, testing/*_test.c, testing/nTox.c:
- parse cmdline for --ipv4/--ipv6 switch to allow user a choice
util.h:
- proper old-style C-comment
- initialisation: argument added to enable/disable ipv6 as socket
Messenger_test.c:
- initialisation: ipv4 hardcoded for now
- delegating IP resolution to DHT_bootstrap_ex()
By default libsodium is used. Only if --enable-nacl is specified, then
nacl will be used instead of libsodium.
Pass locations of nacl headers and libraries by using the following
options:
--with-nacl-headers=/home/me/somewhere/nacl-20110221/build/469/include/amd64/
--with-nacl-libs=/home/me/somewhere/nacl-20110221/build/469/lib/amd64/
This update makes sure that the build still works with automake prior to
1.12 and at the same time does not give any warnings or errors with
automake 1.14
supported options:
--with-dependency-search=DIR will tell configure to look for various
dependencies in DIR/include and DIR/lib
Alternatively you can also specify libsodium header and libs location
with --with-libsodium-headers and --with-libsodium-libs if it is
installed elsewhere.
Ncurses and libconfig are handled via the default pkg-config way, see
./configure --help=short for detailed information.
The tox library is compiled as libtoxcore in shared and static variants,
public headers are installed to ${prefix}/include/tox
A pkg-config libtoxcore.pc configuration file is provided.
Use ./configure --help for a full list of configure options or
./configure --help=short for the options that I added.
To generate the configure script after pulling from git use:
autoreconf -i
To generate a release tarball use:
make dist
Unit tests are handled by the libcheck library integration that is provided
by autotools, use:
make check
to compile and run the tests.
Unit tests are currently optional, i.e. - if the check library is not
found on the system, then tests will be disabled. Same goes for nTox and
DHT bootstrap daemon - they will be enabled or disabled depending on the
availability of ncurses (for nTox) or libconfig (for DHT bootstrap
daemon).
The above can be also tuned by:
--enable-tests / --disable-tests
--enable-ntox / --disable-ntox
--enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon
While doing the checks configure might generate "core" files and will
then try to remove them. Having a "core" directory generates an error
while runing the configure script.
There's no workaround but to rename the core directory.
Set current locale, use of get_wch instead of getch for reading, use
wctomb and friends to convert back from wchar_t, link with
cursesw. Unicode support is only added to chat windows.
