8.3 KiB
#Install Instructions
##Dependencies| Name | Version | Modules |
|---|---|---|
| Qt | >= 5.2.0 | core, gui, network, opengl, sql, svg, widget, xml |
| GCC/MinGW | >= 4.8 | C++11 enabled |
| Tox Core | most recent | core, av |
| OpenCV | >= 2.4.9 | core, highgui, imgproc |
| OpenAL Soft | >= 1.16.0 | |
| filter_audio | most recent |
If your distribution is not listed, or you want/need to compile qTox, there are provided instructions.
Please note that installing toxcore/qTox from AUR is not supported, although installing other dependencies, provided that they met requirements, should be fine, unless you are installing cryptography library from AUR, which should rise red flags by itself…
Most of the dependencies should be available through your package manger. You may either follow the directions below, or simply run ./simple_make.sh after cloning, which will attempt to automatically download dependencies followed by compilation.
###Cloning the Repository In order to clone the qTox repository you need Git.
Arch Linux:
sudo pacman -S --needed git
Debian / Ubuntu:
sudo apt-get install git
Fedora:
yum install git
Afterwards open a new Terminal, change to a directory of your choice and clone the repository:
cd /home/user/qTox
git clone https://github.com/tux3/qTox.git qTox
The following steps assumes that you cloned the repository at "/home/user/qTox". If you decided to choose another location, replace corresponding parts.
###GCC, Qt, OpenCV and OpanAL Soft
Arch Linux:
sudo pacman -S --needed base-devel qt5 opencv openal libxss
Debian / Ubuntu:
sudo apt-get install build-essential qt5-qmake qt5-default qttools5-dev-tools libqt5opengl5-dev libqt5svg5-dev libopenal-dev libopencv-dev libxss-dev
Fedora:
yum groupinstall "Development Tools"
yum install qt-devel qt-doc qt-creator qt5-qtsvg opencv-devel openal-soft-devel libXScrnSaver-devel
Slackware:
You can grab slackbuilds of the needed dependencies here:
http://slackbuilds.org/repository/14.1/libraries/OpenAL/
http://slackbuilds.org/repository/14.1/libraries/qt5/
http://slackbuilds.org/repository/14.1/libraries/opencv/
###Tox Core
First of all install the dependencies of Tox Core.
Arch Linux:
sudo pacman -S --needed opus vpx
Debian / Ubuntu:
sudo apt-get install libtool autotools-dev automake checkinstall check libopus-dev libvpx-dev
Fedora:
yum install libtool autoconf automake check check-devel
Now you can either follow the instructions at https://github.com/irungentoo/toxcore/blob/master/INSTALL.md#unix or use the "bootstrap.sh" script located at "/home/user/qTox". The script will automatically download and install Tox Core and libsodium to "/home/user/qTox/libs":
cd /home/user/qTox
./bootstrap.sh # use -h or --help for more information
###filter_audio
You also need to install filter_audio library separately if you did not run ./bootstrap.sh.
./install_libfilteraudio.sh
After all the dependencies are thus reeady to go, compiling should be as simple as
qmake
make
###Building packages
Alternately, qTox now has the experimental and probably-dodgy ability to package itself (in .deb form natively, and .rpm form with alien).
After installing the required dependencies, run bootstrap.sh and then run the
buildPackages.sh script, found in the tools folder. It will automatically get the
packages necessary for building .debs, so be prepared to type your password for sudo.
###OSX Easy Install
Since https://github.com/ReDetection/homebrew-qtox you can easily install qtox with homebrew
brew install --HEAD ReDetection/qtox/qtox
###OSX Full Install Guide
This guide is intended for people who wish to use an existing or new ProjectTox-Core installation separate to the bundled installation with qTox, if you do not wish to use a separate installation you can skip to the section titled 'Final Steps'.
Installation on OSX, isn't quite straight forward, here is a quick guide on how to install;
Note that qTox now requires OpenCV and OpenAL for video and audio.
The first thing you need to do is install ProjectTox-Core with a/v support. Refer to the INSTALL guide in the PrjectTox-Core github repo.
Next you need to download QtTools (http://qt-project.org/downloads), at the time of writing this is at version .3.0. Make sure you deselect all the unnecessary components from the 5.3 checkbox (iOS/Android libs) otherwise you will end up with a very large download.
Once that is installed you will most likely need to set the path for qmake. To do this, open up terminal and paste in the following;
export PATH=/location/to/qmake/binary:$PATH
For myself, the qmake binary was located in /Users/mouseym/Qt/5.3/clang_64/bin/.
This is not a permanent change, it will revert when you close the terminal window, to add it permanently you will need to add echo the above line to your .profile/.bash_profile.
Once this is installed, do the following;
git clone https://github.com/tux3/qTox
cd toxgui
qmake
Now, we need to create a symlink to /usr/local/lib/ and /usr/local/include/
mkdir -p $HOME/qTox/libs
sudo ln -s /usr/local/lib $HOME/qTox/libs/lib
sudo ln -s /usr/local/include $HOME/qTox/libs/include
####Final Steps
The final step is to run
make
in the qTox directory, or if you are using the bundled tox core installation, you can use
./bootstrap.sh
make
Assuming all went well you should now have a qTox.app file within the directory. Double click and it should open!
##Windows###Qt
Download the Qt online installer for Windows from qt-project.org. While installation you have to assemble your Qt toolchain. Take the most recent version of Qt compiled with MinGW. Although the installer provides its own bundled MinGW compiler toolchain its recommend installing it separately because Qt is missing MSYS which is needed to compile and install OpenCV and OpenAL. Thus you can - if needed - deselect the tab "Tools". The following steps assume that Qt is installed at "C:\Qt". If you decided to choose another location, replace corresponding parts.
###MinGW
Download the MinGW installer for Windows from sourceforge.net. Make sure to install MSYS (a set of Unix tools for Windows). The following steps assume that MinGW is installed at "C:\MinGW". If you decided to choose another location, replace corresponding parts.
###Setting up Path
Add MinGW/MSYS/CMake binaries to the system path to make them globally accessible. Open Control Panel -> System and Security -> System -> Advanced system settings -> Environment Variables... In the second box search for the PATH variable and press Edit... The input box "Variable value:" should already contain some directories. Each directory is separated with a semicolon. Extend the input box by adding ";C:\MinGW\bin;C:\MinGW\msys\1.0\bin;C:\Program Files (x86)\CMake 2.8\bin". The very first semicolon must only be added if it is missing. CMake may be added by installer automatically.
###Cloning the Repository
Clone the repository (https://github.com/tux3/qTox.git) with your preferred Git client. SmartGit is very nice for this task. The following steps assume that you cloned the repository at "C:\qTox". If you decided to choose another location, replace corresponding parts.
Getting dependencies
Run bootstrap.bat in cloned C:\qTox directory Script will download rest of dependencies compile them and put to appropriate directories.