mirror of
https://github.com/Kiritow/wg-ops.git
synced 2024-03-22 13:11:37 +08:00
146 lines
4.3 KiB
Markdown
146 lines
4.3 KiB
Markdown
# WireGuard Ops
|
|
|
|
[wg-quick](https://man7.org/linux/man-pages/man8/wg-quick.8.html) compatiable config generator with additional features supported.
|
|
|
|
## Basic Usage
|
|
|
|
1. Clone this repo with `git clone https://github.com/Kiritow/wg-ops`
|
|
|
|
2. Run `install.sh`. (May prompt sudo)
|
|
|
|
3. Write a valid WireGuard `wg-quick` config file, with supported extension tags. (see below)
|
|
|
|
4. Run `python3 generate.py` to convert extension tags into config lines.
|
|
|
|
5. Bring it up with `wg-quick up`
|
|
|
|
Start as service: `systemctl start wg-quick@wg0`
|
|
|
|
Start service on system start-up: `systemctl enable wg-quick@wg0`
|
|
|
|
See [wg-quick(8)](https://man7.org/linux/man-pages/man8/wg-quick.8.html) for more information.
|
|
|
|
## Options
|
|
|
|
python3 **generate.py** [-h] [-k] [-o *filename*] *source_filename*
|
|
|
|
**-h** Display this help and quit.
|
|
|
|
**-k** Output generated config to standard output
|
|
|
|
**-o** *filename* Output generated config to `filename`. Default write to *source_filename*.gen
|
|
|
|
## Generic Tags
|
|
|
|
**enable-bbr**
|
|
|
|
Enable [TCP BBR](https://en.wikipedia.org/wiki/TCP_congestion_control#TCP_BBR). Most of the time it's useful on VPS.
|
|
|
|
**enable-forward**
|
|
|
|
Set `net.ipv4.ip_forward` to 1. Enable ip packet forward.
|
|
|
|
**enable-dns-reload**
|
|
|
|
Enable DNS reloader for peers with endpoint. For each peer, a [transient timer and service](https://www.freedesktop.org/software/systemd/man/systemd-run.html) will be created and try resolving endpoint domain name every 30 seconds. If the dns record of a domain changes, wg-ops will try to update wireguard interface endpoint settings live.
|
|
|
|
**iptables-forward**
|
|
|
|
Add iptables rules to accept forward from this wireguard interface. Example: `iptables -A FORWARD -i wg0 -j ACCEPT`
|
|
|
|
**iptables-gateway**
|
|
|
|
Add iptables rules to masquerade source ip as a gateway. Example: `iptables -t nat -A POSTROUTING -o wg0 -j MASQUERADE`
|
|
|
|
**podman-user** *username*
|
|
|
|
Run podman container as `username`. Default to `root`.
|
|
|
|
## Tunnel Tags
|
|
|
|
**udp2raw-server** *name* *port* *password*
|
|
|
|
Setup a [udp2raw](https://github.com/wangyu-/udp2raw-tunnel) server. Raw mode set to `fake-tcp`. Expose & listen on port `port`.
|
|
|
|
**udp2raw-client** *name* *port* *remote* *password*
|
|
|
|
Setup a udp2raw client. Listen on port `port`.
|
|
|
|
**udp2raw-client-mux** *name* *mux_size* *port* *remote* *password*
|
|
|
|
Setup multiple (up to `mux_size`) udp2raw clients. Listen on ports from `port` to `port + mux_size`
|
|
|
|
**gost-server** *name* *port*
|
|
|
|
Setup a [gost](https://github.com/ginuerzh/gost) server. Forward mode set to `relay+tls`. Expose & listen on port `port`.
|
|
|
|
**gost-client** *name* *port* *remote*
|
|
|
|
Setup a gost client. Listen on port `port`.
|
|
|
|
**gost-client-mux** *name* *mux_size* *port* *remote*
|
|
|
|
Setup multiple (up to `mux_size`) gost clients. Listen on ports from `port` to `port + mux_size`
|
|
|
|
**trojan-server** *name* *port* *password* *cert_path* *key_path*
|
|
|
|
Setup a [trojan-go](https://github.com/p4gefau1t/trojan-go) server. Expose & listen on port `port`.
|
|
|
|
Requires a ssl certificate signed by trusted CA.
|
|
|
|
[acme.sh](https://github.com/acmesh-official/acme.sh) is recommended for acquiring ssl certs. Make sure use `fullchain.cer` as `cert_path`
|
|
|
|
**trojan-client** *name* *port* *password* *remote_host* *target_port*
|
|
|
|
Setup a trojan-go client. Listen on port `port`.
|
|
|
|
**trojan-client-mux** *name* *mux_size* *port* *password* *remote_host* *target_port*
|
|
|
|
Setup multiple (up to `mux_size`) trojan-go clients. Listen on ports from `port` to `port + mux_size`
|
|
|
|
## Peer Tags
|
|
|
|
**use-tunnel** *name*
|
|
|
|
Use tunnel `name` for this peer. wg-ops may add `Endpoint=` or use `wg set peer` to fullfill this requirement.
|
|
|
|
## Route Tags
|
|
|
|
**route-to** *ip_route_table*
|
|
|
|
Used in chained WireGuard settings. Accept any traffic from `ip_route_table`.
|
|
|
|
Interface marked with `route-to` should have only **one** peer.
|
|
|
|
**route-from** *ip_route_table*
|
|
|
|
Used in chained WireGuard settings. Route traffic from all peers or a marked peer with `ip_route_table`.
|
|
|
|
Example: The following config means all traffic from `10.44.0.2` will be forward to `10.33.0.1`
|
|
|
|
wg0.conf (Should have only one peer)
|
|
|
|
```
|
|
[Interface]
|
|
Address=10.33.0.2
|
|
#route-to TABLE
|
|
|
|
[Peer]
|
|
AllowedIPs=10.33.0.1
|
|
```
|
|
|
|
wg1.conf
|
|
|
|
```
|
|
[Interface]
|
|
Address=10.44.0.1
|
|
|
|
[Peer]
|
|
AllowedIPs=10.44.0.2
|
|
#route-from TABLE
|
|
```
|
|
|
|
## Notice
|
|
|
|
Make sure to setup firewall for better security. [ufw](http://manpages.ubuntu.com/manpages/bionic/man8/ufw.8.html) is recommended for Ubuntu.
|