toxcore/other/bootstrap_daemon

#Instructions

• For systemd users
  • Setting up
  • Updating
  • Troubleshooting
    
• For init.d users
  • Setting up
  • Updating
  • Troubleshooting
    
• For Docker users
  • Setting up
  • Updating
  • Troubleshooting

These instructions are primarily tested on Debian Linux, Wheezy for init.d and Jessie for systemd, but they should work on other POSIX-compliant systems too.

##For `systemd` users ###Setting up

For security reasons we run the daemon under its own user.

Create a new user by executing the following:

sudo useradd --home-dir /var/lib/tox-bootstrapd --create-home --system --shell /sbin/nologin --comment "Account to run Tox's DHT bootstrap daemon" --user-group tox-bootstrapd

Restrict access to home directory:

sudo chmod 700 /var/lib/tox-bootstrapd

Copy tox-bootstrapd.conf file to where ExecStart= from tox-bootstrapd.service points to. By default it's /etc/tox-bootstrapd.conf.

sudo cp tox-bootstrapd.conf /etc/tox-bootstrapd.conf

Go over everything in the copied tox-bootstrapd.conf file. Set options you want and add actual working nodes to the bootstrap_nodes list, instead of the example ones, if you want your node to connect to the Tox network. Make sure pid_file_path matches PIDFile= from tox-bootstrapd.service.

Copy tox-bootstrapd.service to /etc/systemd/system/:

sudo cp tox-bootstrapd.service /etc/systemd/system/

You must uncomment the next line in tox-bootstrapd.service, if you want to use port number < 1024

#CapabilityBoundingSet=CAP_NET_BIND_SERVICE

and, possibly, install libcap2-bin or libcap2 package, depending of your distribution.

Reload systemd units definitions, enable service for automatic start (if needed), start it and verify it's running:

sudo systemctl daemon-reload
sudo systemctl enable tox-bootstrapd.service
sudo systemctl start tox-bootstrapd.service
sudo systemctl status tox-bootstrapd.service

Get your public key and check that the daemon initialized correctly:

sudo grep "tox-bootstrapd" /var/log/syslog

###Updating

You want to make sure that the daemon uses the newest toxcore, as there might have been some changes done to the DHT, so it's advised to update the daemon at least once every month.

To update the daemon first stop it:

sudo systemctl stop tox-bootstrapd.service

Then update your toxcore git repository, rebuild the toxcore and the daemon and make sure to install them.

Check if tox-bootstrapd.service in toxcore git repository was modified since the last time you copied it, as you might need to update it too.

After all of this is done, simply start the daemon back again:

sudo systemctl start tox-bootstrapd.service

Note that tox-bootstrapd.service file might

###Troubleshooting

• Check daemon's status:

sudo systemctl status tox-bootstrapd.service

• Check the log for errors:

sudo grep "tox-bootstrapd" /var/log/syslog
# or
sudo journalctl --pager-end
# or
sudo journalctl -f _SYSTEMD_UNIT=tox-bootstrapd.service

• Make sure tox-bootstrapd user has write permission for keys and pid files.

• Make sure tox-bootstrapd has read permission for the config file.

• Make sure tox-bootstrapd location matches its path in tox-bootstrapd.service file.

##For `init.d` users ###Setting up

For security reasons we run the daemon under its own user.

Create a new user by executing the following:

sudo useradd --home-dir /var/lib/tox-bootstrapd --create-home --system --shell /sbin/nologin --comment "Account to run Tox's DHT bootstrap daemon" --user-group tox-bootstrapd

Restrict access to home directory:

sudo chmod 700 /var/lib/tox-bootstrapd

Copy tox-bootstrapd.conf file to where CFGFILE variable from tox-bootstrapd.sh points to. By default it's /etc/tox-bootstrapd.conf.

sudo cp tox-bootstrapd.conf /etc/tox-bootstrapd.conf

Go over everything in the copied tox-bootstrapd.conf file. Set options you want and add actual working nodes to the bootstrap_nodes list, instead of the example ones, if you want your node to connect to the Tox network. Make sure pid_file_path matches PIDFILE from tox-bootstrapd.sh.

Look at the variable declarations in the beginning of tox-bootstrapd.sh init script to see if you need to change anything for it to work on your system. The default values must be fine for most users and we assume that you use those next.

Copy tox-bootstrapd.sh init script to /etc/init.d/tox-bootstrapd (note the disappearance of ".sh" ending):

sudo cp tox-bootstrapd.sh /etc/init.d/tox-bootstrapd

Set permissions for the init system to run the script:

sudo chmod 755 /etc/init.d/tox-bootstrapd

Make the init system aware of the script, start the daemon and verify it's running:

sudo update-rc.d tox-bootstrapd defaults
sudo service tox-bootstrapd start
sudo service tox-bootstrapd status

Get your public key and check that the daemon initialized correctly:

sudo grep "tox-bootstrapd" /var/log/syslog

###Updating

You want to make sure that the daemon uses the newest toxcore, as there might have been some changes done to the DHT, so it's advised to update the daemon at least once every month.

To update the daemon first stop it:

sudo service tox-bootstrapd stop

Then update your toxcore git repository, rebuild the toxcore and the daemon and make sure to install them.

Check if tox-bootstrapd.sh in toxcore git repository was modified since the last time you copied it, as you might need to update it too.

After all of this is done, simply start the daemon back again:

sudo service tox-bootstrapd start

###Troubleshooting

• Check daemon's status:

sudo service tox-bootstrapd status

• Check the log for errors:

sudo grep "tox-bootstrapd" /var/log/syslog

• Check that variables in the beginning of /etc/init.d/tox-bootstrapd are valid.

• Make sure tox-bootstrapd user has write permission for keys and pid files.

• Make sure tox-bootstrapd has read permission for the config file.

• Make sure tox-bootstrapd location matches its path in the /etc/init.d/tox-bootstrapd init script.

##For `Docker` users: ###Setting up

If you are familiar with Docker and would rather run the daemon in a Docker container, run the following from this directory:

sudo docker build -t tox-bootstrapd docker/

sudo useradd --home-dir /var/lib/tox-bootstrapd --create-home --system --shell /sbin/nologin --comment "Account to run Tox's DHT bootstrap daemon" --user-group tox-bootstrapd
sudo chmod 700 /var/lib/tox-bootstrapd

sudo docker run -d --name tox-bootstrapd --restart always -v /var/lib/tox-bootstrapd/:/var/lib/tox-bootstrapd/ -p 443:443 -p 3389:3389 -p 33445:33445 -p 33445:33445/udp tox-bootstrapd

We create a new user and protect its home directory in order to mount it in the Docker image, so that the kyepair the daemon uses would be stored on the host system, which makes it less likely that you would loose the keypair while playing with or updating the Docker container.

You can check logs for your public key or any errors:

sudo docker logs tox-bootstrapd

Note that the Docker container runs a script which pulls a list of bootstrap nodes off https://nodes.tox.chat/ and adds them in the config file.

###Updating

You want to make sure that the daemon uses the newest toxcore, as there might have been some changes done to the DHT, so it's advised to update the daemon at least once every month.

To update the daemon, all you need is to erase current container with its image:

sudo docker stop tox-bootstrapd
sudo docker rm tox-bootstrapd
sudo docker rmi tox-bootstrapd

Then rebuild and run the image again:

sudo docker build -t tox-bootstrapd docker/
sudo docker run -d --name tox-bootstrapd --restart always -v /var/lib/tox-bootstrapd/:/var/lib/tox-bootstrapd/ -p 443:443 -p 3389:3389 -p 33445:33445 -p 33445:33445/udp tox-bootstrapd

###Troubleshooting

• Check if the container is running:

sudo docker ps -a

• Check the log for errors:

sudo docker logs tox-bootstrapd