toxcore/other/Makefile.inc

noinst_PROGRAMS += DHT_bootstrap

DHT_bootstrap_SOURCES = ../other/DHT_bootstrap.c \
                        ../toxcore/DHT.h \
                        ../toxcore/friend_requests.h

DHT_bootstrap_CFLAGS = -I$(top_srcdir)/other \
                        $(LIBSODIUM_CFLAGS) \
                        $(NACL_CFLAGS)

DHT_bootstrap_LDADD =   $(LIBSODIUM_LDFLAGS) \
                        $(NACL_LDFLAGS) \
                        libtoxcore.la \
                        $(LIBSODIUM_LIBS) \
                        $(NACL_LIBS) \
                        $(WINSOCK2_LIBS)

EXTRA_DIST +=           $(top_srcdir)/other/DHTservers \
                        $(top_srcdir)/other/tox.png
Implemented autotools based build scripts supported options: --with-dependency-search=DIR will tell configure to look for various dependencies in DIR/include and DIR/lib Alternatively you can also specify libsodium header and libs location with --with-libsodium-headers and --with-libsodium-libs if it is installed elsewhere. Ncurses and libconfig are handled via the default pkg-config way, see ./configure --help=short for detailed information. The tox library is compiled as libtoxcore in shared and static variants, public headers are installed to ${prefix}/include/tox A pkg-config libtoxcore.pc configuration file is provided. Use ./configure --help for a full list of configure options or ./configure --help=short for the options that I added. To generate the configure script after pulling from git use: autoreconf -i To generate a release tarball use: make dist Unit tests are handled by the libcheck library integration that is provided by autotools, use: make check to compile and run the tests. Unit tests are currently optional, i.e. - if the check library is not found on the system, then tests will be disabled. Same goes for nTox and DHT bootstrap daemon - they will be enabled or disabled depending on the availability of ncurses (for nTox) or libconfig (for DHT bootstrap daemon). The above can be also tuned by: --enable-tests / --disable-tests --enable-ntox / --disable-ntox --enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon 2013-08-14 02:55:32 +08:00			`noinst_PROGRAMS += DHT_bootstrap`

Forward compatibility with automake 1.14 This update makes sure that the build still works with automake prior to 1.12 and at the same time does not give any warnings or errors with automake 1.14 2013-08-30 18:35:48 +08:00			`DHT_bootstrap_SOURCES = ../other/DHT_bootstrap.c \`
			`../toxcore/DHT.h \`
			`../toxcore/friend_requests.h`
Implemented autotools based build scripts supported options: --with-dependency-search=DIR will tell configure to look for various dependencies in DIR/include and DIR/lib Alternatively you can also specify libsodium header and libs location with --with-libsodium-headers and --with-libsodium-libs if it is installed elsewhere. Ncurses and libconfig are handled via the default pkg-config way, see ./configure --help=short for detailed information. The tox library is compiled as libtoxcore in shared and static variants, public headers are installed to ${prefix}/include/tox A pkg-config libtoxcore.pc configuration file is provided. Use ./configure --help for a full list of configure options or ./configure --help=short for the options that I added. To generate the configure script after pulling from git use: autoreconf -i To generate a release tarball use: make dist Unit tests are handled by the libcheck library integration that is provided by autotools, use: make check to compile and run the tests. Unit tests are currently optional, i.e. - if the check library is not found on the system, then tests will be disabled. Same goes for nTox and DHT bootstrap daemon - they will be enabled or disabled depending on the availability of ncurses (for nTox) or libconfig (for DHT bootstrap daemon). The above can be also tuned by: --enable-tests / --disable-tests --enable-ntox / --disable-ntox --enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon 2013-08-14 02:55:32 +08:00
			`DHT_bootstrap_CFLAGS = -I$(top_srcdir)/other \`
Allow to build vs nacl instead of libsodium By default libsodium is used. Only if --enable-nacl is specified, then nacl will be used instead of libsodium. Pass locations of nacl headers and libraries by using the following options: --with-nacl-headers=/home/me/somewhere/nacl-20110221/build/469/include/amd64/ --with-nacl-libs=/home/me/somewhere/nacl-20110221/build/469/lib/amd64/ 2013-09-05 18:02:26 +08:00			`$(LIBSODIUM_CFLAGS) \`
			`$(NACL_CFLAGS)`
Implemented autotools based build scripts supported options: --with-dependency-search=DIR will tell configure to look for various dependencies in DIR/include and DIR/lib Alternatively you can also specify libsodium header and libs location with --with-libsodium-headers and --with-libsodium-libs if it is installed elsewhere. Ncurses and libconfig are handled via the default pkg-config way, see ./configure --help=short for detailed information. The tox library is compiled as libtoxcore in shared and static variants, public headers are installed to ${prefix}/include/tox A pkg-config libtoxcore.pc configuration file is provided. Use ./configure --help for a full list of configure options or ./configure --help=short for the options that I added. To generate the configure script after pulling from git use: autoreconf -i To generate a release tarball use: make dist Unit tests are handled by the libcheck library integration that is provided by autotools, use: make check to compile and run the tests. Unit tests are currently optional, i.e. - if the check library is not found on the system, then tests will be disabled. Same goes for nTox and DHT bootstrap daemon - they will be enabled or disabled depending on the availability of ncurses (for nTox) or libconfig (for DHT bootstrap daemon). The above can be also tuned by: --enable-tests / --disable-tests --enable-ntox / --disable-ntox --enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon 2013-08-14 02:55:32 +08:00
			`DHT_bootstrap_LDADD = $(LIBSODIUM_LDFLAGS) \`
Allow to build vs nacl instead of libsodium By default libsodium is used. Only if --enable-nacl is specified, then nacl will be used instead of libsodium. Pass locations of nacl headers and libraries by using the following options: --with-nacl-headers=/home/me/somewhere/nacl-20110221/build/469/include/amd64/ --with-nacl-libs=/home/me/somewhere/nacl-20110221/build/469/lib/amd64/ 2013-09-05 18:02:26 +08:00			`$(NACL_LDFLAGS) \`
Implemented autotools based build scripts supported options: --with-dependency-search=DIR will tell configure to look for various dependencies in DIR/include and DIR/lib Alternatively you can also specify libsodium header and libs location with --with-libsodium-headers and --with-libsodium-libs if it is installed elsewhere. Ncurses and libconfig are handled via the default pkg-config way, see ./configure --help=short for detailed information. The tox library is compiled as libtoxcore in shared and static variants, public headers are installed to ${prefix}/include/tox A pkg-config libtoxcore.pc configuration file is provided. Use ./configure --help for a full list of configure options or ./configure --help=short for the options that I added. To generate the configure script after pulling from git use: autoreconf -i To generate a release tarball use: make dist Unit tests are handled by the libcheck library integration that is provided by autotools, use: make check to compile and run the tests. Unit tests are currently optional, i.e. - if the check library is not found on the system, then tests will be disabled. Same goes for nTox and DHT bootstrap daemon - they will be enabled or disabled depending on the availability of ncurses (for nTox) or libconfig (for DHT bootstrap daemon). The above can be also tuned by: --enable-tests / --disable-tests --enable-ntox / --disable-ntox --enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon 2013-08-14 02:55:32 +08:00			`libtoxcore.la \`
			`$(LIBSODIUM_LIBS) \`
Allow to build vs nacl instead of libsodium By default libsodium is used. Only if --enable-nacl is specified, then nacl will be used instead of libsodium. Pass locations of nacl headers and libraries by using the following options: --with-nacl-headers=/home/me/somewhere/nacl-20110221/build/469/include/amd64/ --with-nacl-libs=/home/me/somewhere/nacl-20110221/build/469/lib/amd64/ 2013-09-05 18:02:26 +08:00			`$(NACL_LIBS) \`
Implemented autotools based build scripts supported options: --with-dependency-search=DIR will tell configure to look for various dependencies in DIR/include and DIR/lib Alternatively you can also specify libsodium header and libs location with --with-libsodium-headers and --with-libsodium-libs if it is installed elsewhere. Ncurses and libconfig are handled via the default pkg-config way, see ./configure --help=short for detailed information. The tox library is compiled as libtoxcore in shared and static variants, public headers are installed to ${prefix}/include/tox A pkg-config libtoxcore.pc configuration file is provided. Use ./configure --help for a full list of configure options or ./configure --help=short for the options that I added. To generate the configure script after pulling from git use: autoreconf -i To generate a release tarball use: make dist Unit tests are handled by the libcheck library integration that is provided by autotools, use: make check to compile and run the tests. Unit tests are currently optional, i.e. - if the check library is not found on the system, then tests will be disabled. Same goes for nTox and DHT bootstrap daemon - they will be enabled or disabled depending on the availability of ncurses (for nTox) or libconfig (for DHT bootstrap daemon). The above can be also tuned by: --enable-tests / --disable-tests --enable-ntox / --disable-ntox --enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon 2013-08-14 02:55:32 +08:00			`$(WINSOCK2_LIBS)`

Remove cmake build system 2013-08-24 08:36:43 +08:00			`EXTRA_DIST += $(top_srcdir)/other/DHTservers \`
Implemented autotools based build scripts supported options: --with-dependency-search=DIR will tell configure to look for various dependencies in DIR/include and DIR/lib Alternatively you can also specify libsodium header and libs location with --with-libsodium-headers and --with-libsodium-libs if it is installed elsewhere. Ncurses and libconfig are handled via the default pkg-config way, see ./configure --help=short for detailed information. The tox library is compiled as libtoxcore in shared and static variants, public headers are installed to ${prefix}/include/tox A pkg-config libtoxcore.pc configuration file is provided. Use ./configure --help for a full list of configure options or ./configure --help=short for the options that I added. To generate the configure script after pulling from git use: autoreconf -i To generate a release tarball use: make dist Unit tests are handled by the libcheck library integration that is provided by autotools, use: make check to compile and run the tests. Unit tests are currently optional, i.e. - if the check library is not found on the system, then tests will be disabled. Same goes for nTox and DHT bootstrap daemon - they will be enabled or disabled depending on the availability of ncurses (for nTox) or libconfig (for DHT bootstrap daemon). The above can be also tuned by: --enable-tests / --disable-tests --enable-ntox / --disable-ntox --enable-dht-bootstrap-daemon / --disable-dht-bootstrap-daemon 2013-08-14 02:55:32 +08:00			`$(top_srcdir)/other/tox.png`