<p><strong>Note:</strong> This document is itself written using Markdown; you
can <ahref="/projects/markdown/syntax.text">see the source for it by adding '.text' to the URL</a>.</p>
<hr>
<h2id="overview">Overview</h2>
<h3id="philosophy">Philosophy</h3>
<p>Markdown is intended to be as easy-to-read and easy-to-write as is feasible.</p>
<p>Readability, however, is emphasized above all else. A Markdown-formatted
document should be publishable as-is, as plain text, without looking
like it's been marked up with tags or formatting instructions. While
Markdown's syntax has been influenced by several existing text-to-HTML
filters -- including <ahref="http://docutils.sourceforge.net/mirror/setext.html">Setext</a>, <ahref="http://www.aaronsw.com/2002/atx/">atx</a>, <ahref="http://textism.com/tools/textile/">Textile</a>, <ahref="http://docutils.sourceforge.net/rst.html">reStructuredText</a>,
<ahref="http://www.triptico.com/software/grutatxt.html">Grutatext</a>, and <ahref="http://ettext.taint.org/doc/">EtText</a> -- the single biggest source of
inspiration for Markdown's syntax is the format of plain text email.</p>
<p>To this end, Markdown's syntax is comprised entirely of punctuation
characters, which punctuation characters have been carefully chosen so
as to look like what they mean. E.g., asterisks around a word actually
look like *emphasis*. Markdown lists look like, well, lists. Even
blockquotes look like quoted passages of text, assuming you've ever
used email.</p>
<h3id="html">Inline HTML</h3>
<p>Markdown's syntax is intended for one purpose: to be used as a
format for <em>writing</em> for the web.</p>
<p>Markdown is not a replacement for HTML, or even close to it. Its
syntax is very small, corresponding only to a very small subset of
HTML tags. The idea is <em>not</em> to create a syntax that makes it easier
to insert HTML tags. In my opinion, HTML tags are already easy to
insert. The idea for Markdown is to make it easy to read, write, and
edit prose. HTML is a <em>publishing</em> format; Markdown is a <em>writing</em>
format. Thus, Markdown's formatting syntax only addresses issues that
can be conveyed in plain text.</p>
<p>For any markup that is not covered by Markdown's syntax, you simply
use HTML itself. There's no need to preface it or delimit it to
indicate that you're switching from Markdown to HTML; you just use
the tags.</p>
<p>The only restrictions are that block-level HTML elements -- e.g. <code><div></code>,
<code><table></code>, <code><pre></code>, <code><p></code>, etc. -- must be separated from surrounding
content by blank lines, and the start and end tags of the block should
not be indented with tabs or spaces. Markdown is smart enough not
to add extra (unwanted) <code><p></code> tags around HTML block-level tags.</p>
<p>For example, to add an HTML table to a Markdown article:</p>
<pre><code>This is a regular paragraph.
<table>
<tr>
<td>Foo</td>
</tr>
</table>
This is another regular paragraph.
</code></pre>
<p>Note that Markdown formatting syntax is not processed within block-level
HTML tags. E.g., you can't use Markdown-style <code>*emphasis*</code> inside an
HTML block.</p>
<p>Span-level HTML tags -- e.g. <code><span></code>, <code><cite></code>, or <code><del></code> -- can be
used anywhere in a Markdown paragraph, list item, or header. If you
want, you can even use HTML tags instead of Markdown formatting; e.g. if
you'd prefer to use HTML <code><a></code> or <code><img></code> tags instead of Markdown's
link or image syntax, go right ahead.</p>
<p>Unlike block-level HTML tags, Markdown syntax <em>is</em> processed within
span-level tags.</p>
<h3id="autoescape">Automatic Escaping for Special Characters</h3>
<p>In HTML, there are two characters that demand special treatment: <code><</code>
and <code>&</code>. Left angle brackets are used to start tags; ampersands are
used to denote HTML entities. If you want to use them as literal
characters, you must escape them as entities, e.g. <code>&lt;</code>, and
<code>&amp;</code>.</p>
<p>Ampersands in particular are bedeviling for web writers. If you want to
write about 'AT&T', you need to write '<code>AT&amp;T</code>'. You even need to
escape ampersands within URLs. Thus, if you want to link to:</p>
<p>in your anchor tag <code>href</code> attribute. Needless to say, this is easy to
forget, and is probably the single most common source of HTML validation
errors in otherwise well-marked-up web sites.</p>
<p>Markdown allows you to use these characters naturally, taking care of
all the necessary escaping for you. If you use an ampersand as part of
an HTML entity, it remains unchanged; otherwise it will be translated
into <code>&amp;</code>.</p>
<p>So, if you want to include a copyright symbol in your article, you can write:</p>
<pre><code>&copy;
</code></pre>
<p>and Markdown will leave it alone. But if you write:</p>
<pre><code>AT&T
</code></pre>
<p>Markdown will translate it to:</p>
<pre><code>AT&amp;T
</code></pre>
<p>Similarly, because Markdown supports <ahref="#html">inline HTML</a>, if you use
angle brackets as delimiters for HTML tags, Markdown will treat them as
such. But if you write:</p>
<pre><code>4 < 5
</code></pre>
<p>Markdown will translate it to:</p>
<pre><code>4 &lt; 5
</code></pre>
<p>However, inside Markdown code spans and blocks, angle brackets and
ampersands are <em>always</em> encoded automatically. This makes it easy to use
Markdown to write about HTML code. (As opposed to raw HTML, which is a
terrible format for writing about HTML syntax, because every single <code><</code>
and <code>&</code> in your example code needs to be escaped.)</p>
<hr>
<h2id="block">Block Elements</h2>
<h3id="p">Paragraphs and Line Breaks</h3>
<p>A paragraph is simply one or more consecutive lines of text, separated
by one or more blank lines. (A blank line is any line that looks like a
blank line -- a line containing nothing but spaces or tabs is considered
blank.) Normal paragraphs should not be intended with spaces or tabs.</p>
<p>The implication of the "one or more consecutive lines of text" rule is
that Markdown supports "hard-wrapped" text paragraphs. This differs
significantly from most other text-to-HTML formatters (including Movable
Type's "Convert Line Breaks" option) which translate every line break
character in a paragraph into a <code><br /></code> tag.</p>
<p>When you <em>do</em> want to insert a <code><br /></code> break tag using Markdown, you
end a line with two or more spaces, then type return.</p>
<p>Yes, this takes a tad more effort to create a <code><br /></code>, but a simplistic
"every line break is a <code><br /></code>" rule wouldn't work for Markdown.
Markdown's email-style <ahref="#blockquote">blockquoting</a> and multi-paragraph <ahref="#list">list items</a>
work best -- and look better -- when you format them with hard breaks.</p>
<h3id="header">Headers</h3>
<p>Markdown supports two styles of headers, <ahref="http://docutils.sourceforge.net/mirror/setext.html">Setext</a> and <ahref="http://www.aaronsw.com/2002/atx/">atx</a>.</p>
<p>Setext-style headers are "underlined" using equal signs (for first-level
headers) and dashes (for second-level headers). For example:</p>
<pre><code>This is an H1
=============
This is an H2
-------------
</code></pre>
<p>Any number of underlining <code>=</code>'s or <code>-</code>'s will work.</p>
<p>Atx-style headers use 1-6 hash characters at the start of the line,
corresponding to header levels 1-6. For example:</p>
<pre><code># This is an H1
## This is an H2
###### This is an H6
</code></pre>
<p>Optionally, you may "close" atx-style headers. This is purely
cosmetic -- you can use this if you think it looks better. The
closing hashes don't even need to match the number of hashes
used to open the header. (The number of opening hashes
determines the header level.) :</p>
<pre><code># This is an H1 #
## This is an H2 ##
### This is an H3 ######
</code></pre>
<h3id="blockquote">Blockquotes</h3>
<p>Markdown uses email-style <code>></code> characters for blockquoting. If you're
familiar with quoting passages of text in an email message, then you
know how to create a blockquote in Markdown. It looks best if you hard
wrap the text and put a <code>></code> before every line:</p>
<pre><code>> This is a blockquote with two paragraphs. Lorem ipsum dolor sit amet,
> consectetuer adipiscing elit. Aliquam hendrerit mi posuere lectus.
> Vestibulum enim wisi, viverra nec, fringilla in, laoreet vitae, risus.
>
> Donec sit amet nisl. Aliquam semper ipsum sit amet velit. Suspendisse
> id sem consectetuer libero luctus adipiscing.
</code></pre>
<p>Markdown allows you to be lazy and only put the <code>></code> before the first
line of a hard-wrapped paragraph:</p>
<pre><code>> This is a blockquote with two paragraphs. Lorem ipsum dolor sit amet,
consectetuer adipiscing elit. Aliquam hendrerit mi posuere lectus.
Vestibulum enim wisi, viverra nec, fringilla in, laoreet vitae, risus.
> Donec sit amet nisl. Aliquam semper ipsum sit amet velit. Suspendisse
id sem consectetuer libero luctus adipiscing.
</code></pre>
<p>Blockquotes can be nested (i.e. a blockquote-in-a-blockquote) by
adding additional levels of <code>></code>:</p>
<pre><code>> This is the first level of quoting.
>
>> This is nested blockquote.
>
> Back to the first level.
</code></pre>
<p>Blockquotes can contain other Markdown elements, including headers, lists,
<p>Link definitions are only used for creating links during Markdown
processing, and are stripped from your document in the HTML output.</p>
<p>Link definition names may constist of letters, numbers, spaces, and punctuation -- but they are <em>not</em> case sensitive. E.g. these two links:</p>
<pre><code>[link text][a]
[link text][A]
</code></pre>
<p>are equivalent.</p>
<p>The <em>implicit link name</em> shortcut allows you to omit the name of the
link, in which case the link text itself is used as the name.
Just use an empty set of square brackets -- e.g., to link the word
"Google" to the google.com web site, you could simply write:</p>
<pre><code>[Google][]
</code></pre>
<p>And then define the link:</p>
<pre><code>[Google]: http://google.com/
</code></pre>
<p>Because link names may contain spaces, this shortcut even works for
multiple words in the link text:</p>
<pre><code>Visit [Daring Fireball][] for more information.
<li>followed by a set of square brackets, containing the <code>alt</code>
attribute text for the image;</li>
<li>followed by a set of parentheses, containing the URL or path to
the image, and an optional <code>title</code> attribute enclosed in double
or single quotes.</li>
</ul>
<p>Reference-style image syntax looks like this:</p>
<pre><code>![Alt text][id]
</code></pre>
<p>Where "id" is the name of a defined image reference. Image references
are defined using syntax identical to link references:</p>
<pre><code>[id]: url/to/image "Optional title attribute"
</code></pre>
<p>As of this writing, Markdown has no syntax for specifying the
dimensions of an image; if this is important to you, you can simply
use regular HTML <code><img></code> tags.</p>
<hr>
<h2id="misc">Miscellaneous</h2>
<h3id="autolink">Automatic Links</h3>
<p>Markdown supports a shortcut style for creating "automatic" links for URLs and email addresses: simply surround the URL or email address with angle brackets. What this means is that if you want to show the actual text of a URL or email address, and also have it be a clickable link, you can do this:</p>
